| Engine | John Deere PowerTech™ PWL (B20 Diesel Compatible) Engine type – Diesel, in-line, 4-cylinders, wet-sleever cylinder lingers with 4 valves-in-head Rated speed – 2200 rpm Aspiration – Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation Emission level – Final Tier 4 After treatment type – DOC/DPF/SCR Displacement – 4.5 L – 275 cu in. Rated power – 97/68EC: 77 kW – 105 engine hp Rated PTO power (hp SAE) – 66 kW – 89 PTO hp Engine peak torque – At 1,600 rpm: 432 Nm – 318 lb-ft PTO torque rise – 30 percent |
| Transmission | Type – John Deere 24F/12R PowrReverser Transmission: 40 km/h – 25 mph |
| Hydraulic system | Type – Open-center – Gear driven Pump rated output – 36.5 cc pump: 75.7 L/min – 20 gpm Available flow at a single rear SCV – 75.7 L/min – 20 gpm Number of rear selective control valves (SCVs) – ISO Couplers 3 SCV control – Mechanical |
| Rear hitch | Hitch category (SAE designation) – Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint Maximum lift capacity behind lift points – Standard: Category 2 with heavy duty lift: 3318 kg – 7300 lb |
| 3-point hitch | Type – Category 1 Lift capacity, 24-in. behind link arms – 1135 kg, 2500 lb |
| Drawbar | Drawbar category – Category 2 Maximum vertical load – Standard: Category 2 1000-1250 kg – 2205-2756 lb |
| Rear power take-off (PTO) | Type – Independent – Standard: 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft Engine rpm (at rated PTO speeds) – 2085 engine rpm at 540 rpm PTO – 2067 engine rpm at 1000 rpm PTO |
- Configuration: Standard
- Cab: Cab
- Transmission: Power Reverser
- Front Axle: MFWD
- Rear PTO: 540
- Tire Width: Mid
- Loader: Yes
- Options: Loader Ready
