| Key Specs | Engine Power – 42.5 hp Power take-off (PTO) power – PowrReverser™ transmission: 25 kW Steering hydraulics – 23.5 L/min, 6.2 gpm Implement hydraulics – 42.3 L/min , 11.2 gpm Hitch type – Category 1 Lift capacity, 24-in. behind link arms – 1135 kg, 2500 lb Standard transmission; forward/reverse – PowrReverser transmission Approximate shipping weight (open-station; cab) – Open operator station (OOS): 1705 kg Wheelbase – 185.5 cm, 73 in. |
| Engine | Manufacturer – Yanmar® Engine model – 4TNV88C-MJT Engine power (gross) – SAE J1995 rated power: 31.7 kW, 42.5 hp, 43.1 PS at 2600 rpm Power take-off (PTO) power – PowrReverser transmission: 25 kWh, 33.6 hp Rated engine speed – 2600 rpm Emissions compliance – Final Tier 4 Cylinders/displacement – 4 / 2.189 L, 4 / 133.5 cu in. Number of cylinders – 4 Cylinder liners – Cast-in-block Bore and stroke – 88×90 mm – 3.46×3.54 in. Compression ratio – 19.1:1 Lubrication – Pressurized Cooling system – Liquid Air cleaner – Dual element Engine torque at rated speed – 116 Nm – 85.6 lb-ft Fuel tank capacity – 56.9 L – 15 U.S. gal. |
| Transmission | eHydro transmission |
| Hydraulics | Type – Open center Pump rated output – Steering Pump type – Single gear Draft control sensing – Position control Remote control valves available – Up to six rear remotes |
| 3-point hitch | Type – Category 1 Lift capacity, 24-in. behind link arms – 1135 kg, 2500 lb |
| Power take-off (PTO) | Standard – Independent – 540 rpm at 2600 rpm Control – Position Clutch – Wet disc |
| Dimensions | Wheelbase – 185.5 cm – 73 in. Front axle clearance – 35.1 cm – 13.8 in. Turning radius with brakes – 2.8 m – 9.19 ft Turning radius without brakes – 3.0 m – 9.84 ft |
- Transmission: Hydro
- Front Axle: MFWD
- Loader: Yes
- Operating Hours: 108
